Nissan 200SX S13

Nissan_S13_CUT
The listed products are only a rough selection of our assortment


Display per page
Sort by
1 - 50 of 64 results

Origin Labo Stream Line Bodykit for Nissan 200SX PS13

Origin Labo Bodykit PS13

Origin Labo "Stream Line" bodykit
To suit Nissan 200SX PS13
Material : fiber reinforced plastic (FRP)
Designed in Japan by Origin Labo
Quality finish with precise fitment

799.99 *
available

Solid Subframe Bushes for Nissan S13, S14, S15,....

Strengthen your rear subframe

Compatible with Nissan 200SX S13, S14, S15, Skyline R32, R33, R34, 300ZX Z32 ...
Corrects roll center by about 15 mm
Recommended for lowered vehicles
Subframe removal required for installation
 

119.99 *
available

Origin Labo Stream Line Bodykit for Nissan 200SX S13

Origin Labo Bodykit S13

Origin Labo "Stream Line" bodykit
To suit Nissan 200SX S13
Material : fiber reinforced plastic (FRP)
Designed in Japan by Origin Labo
Quality finish with precise fitment

799.99 *
available

Exedy Stage2 clutch - Nissan S13 (CA18DET)

Reinforced Exedy Clutch KIT for your missile

STAGE 2 - 5 Paddle

For Nissan S13 89-94 (CA18DET)
Max torque capacity: 420Nm (310 lb. ft)

Covering: cerametallic
Exedy Reference: NK11T016

299.99 *
sold out (on demand)

Exedy Stage1 clutch - Nissan S13 (CA18DET)

Reinforced Exedy Clutch KIT for your missile

STAGE 1

For Nissan S13 89-94 (CA18DET)
Max torque capacity: 370Nm (280 lb. ft)

Surface: organic
Exedy Reference: NK11H016

269.99 *
available

Origin Labo Stylish Line Bodykit for Nissan 200SX PS13

Origin Labo Bodykit PS13

Origin Labo "Stylish Line" bodykit
To suit Nissan 200SX PS13
Material : fiber reinforced plastic (FRP)
Designed in Japan by Origin Labo
Quality finish with precise fitment

799.99 *
available

Tein S-Tech springs for Nissan S13 45/30

The TEIN S-Tech spring KIT

Wheat laying: -45mm VA / -30mm HA
Spring rate: 3,2kgF / mm VA / 2,9kgF / mm

Scope of delivery: 4 springs (2x VA 2x HA)

Made in the USA

WITHOUT ABE OR TÜV OPINION!

199.99 *
available

Origin Labo Stylish Line Bodykit for Nissan 200SX S13

Origin Labo Bodykit S13

Origin Labo "Stylish Line" bodykit
To suit Nissan 200SX S13
Material : fiber reinforced plastic (FRP)
Designed in Japan by Origin Labo
Quality finish with precise fitment

799.99 *
available

Deatschwerks 550cc Injectors for Nissan 200SX S13 (CA18DET, set of 4)

Deatschwerks 550cc Injectors

A set of 4 550cc Deatschwerks Injectors
To suit Nissan 200SX S13 (CA18DET)
Direct replacement for OEM injectors (plug & play)
Low impedance
Deatschwerks reference : 42M-01-0550-4
Supplied flow matched and balanced
E85 compatible

379.99 *
available

OEM Nissan Z32 air mass meter (the legend)

The legend!

Original Nissan part
Suitable for S13, S14, S14a, and S15
Tested with warranty

USED ​​PART!

199.99 *
available

Origin Labo "Type 2" Carbon Bonnet for Nissan Silvia PS13

Origin Labo Carbon Bonnet PS13

Part type : "Type 2" carbon bonnet
To suit Nissan Silvia PS13
Material : carbon fiber
Designed in Japan by Origin Labo
Quality finish with precise fitment
"bolt on" installation in place of OEM part

759.99 *
available

Deatschwerks 800cc Injectors for Nissan 200SX S13 (CA18DET, set of 4)

Deatschwerks 800cc Injectors

A set of 4 800cc Deatschwerks Injectors
To suit Nissan 200SX S13 (CA18DET)
Direct replacement for OEM injectors (plug & play)
Low impedance
Deatschwerks reference : 42M-01-0800-4
Supplied flow matched and balanced
E85 compatible

399.99 *
available

Origin Labo "Type 3" Carbon Bonnet for Nissan 200SX S13

Origin Labo Carbon Bonnet S13

Part type : "Type 3" carbon bonnet
To suit Nissan 200SX S13
Material : carbon fiber
Designed in Japan by Origin Labo
Quality finish with precise fitment
"bolt on" installation in place of OEM part

749.99 *
available

Origin Labo "Type 2" Carbon Bonnet for Nissan 200SX S13

Origin Labo Carbon Bonnet S13

Part type : "Type 2" carbon bonnet
To suit Nissan 200SX S13
Material : carbon fiber
Designed in Japan by Origin Labo
Quality finish with precise fitment
"bolt on" installation in place of OEM part

739.99 *
available

NGK Iridium Spark Plugs Pack - BKR7EIX

Maximum performance and reliability!

NGK Iridium BKR7EIX
1 ° C colder than the OEM candle

Compatible with:
CA18DET, SR20DET, RB25DET, RB26DET, 1JZ, 2JZ, M20, M40, M42, M50, M52, Honda B16, B18C6, and Mazda NA and NB Engines (1.6L & 1.8L)

Made by NGK

69.99 *
available

Tein Super Drift Suspension for Nissan 200SX S13

TEIN Super Drift Suspension!

suitable for Nissan 200SX S13
Fully adjustable
Spring Rate: 10kg F / mm (front) & 8kg F / mm (rear)
Height adjustment: from 17-91mm (front) & 30-111mm (rear)

TEIN Reference: GSN20-D1SS1

Developed for D1JP

1,369.99 *
available

BC Racing RM-MA Coilovers for Nissan 200SX S13 (88-94)

BC Racing Inverted Coilovers RM-MA

High performances for competition use
Inverted design, reduces unsprung weight
For Nissan 200SX S13 (88-94)
Chassis code(s) : S13
Wide range of height adjustment
30 stage damping adjustment
Spring rates : 8 kgF/mm (front) & 6 kgF/mm (rear)
OEM specification brake hose fittings
Anti-corrosion coating and dust boots
1 year warranty
Sold as a set of 4

incl. 3D Top Mounts (camber + caster adjustable)

1,329.99 *
available (1-2 weeks)

ACL oil pump for Nissan SR20DET (inline) engines

ACL Oil Pump for Nissan SR20 engines

For Nissan 180SX, 200SX, S13, S14, S14A, Silvia S15
Engine codes : SR20DE, SR20DET (inline)
Excellent reliability !
ACL part no. : OPNS1342
Plug & play installation: no modification required
ACL Standard range, OEM equivalent

MADE BY ACL

299.99 *
sold out (on demand)

Cometic Gasket Set - Nissan CA18DET (S13) Top End

Cometic makes it tight!

For Nissan S13 (CA18DET) without valve cover gasket
Incl. Cylinder head gasket with 84,0mm bore
Stronger and better than the OEM variant

Cometic Ref: PRO2018T (ProStreet)

Made by Cometic

289.99 *
available

Nissan S13 D2 drift suspension

D2 suspension for Nissan S13 with TÜV Rheinland certification!

36 levels of pressure adjustment
Corrosion resistant aluminum construction
Height and preload independently adjustable
ISO-9001 certified

ATTENTION! The certification is not ABE - The acceptance is at the discretion of the respective TÜV inspection body.

1,090.99 *
available

BC Racing BR-RA Coilovers for Nissan 200SX S13 (88-94)

BC Racing Club Sport Coilovers BR-RA

The best choice for fast road and trackdays
For Nissan 200SX S13 (88-94)
Chassis code(s) : S13
Wide range of height adjustment
30 stage damping adjustment
Spring rates : 6 kgF/mm (front) & 8 kgF/mm (rear)
OEM specification brake hose fittings
Anti-corrosion coating and dust boots
1 year warranty
Sold as a set of 4

1,099.99 *
available

NGK Iridium Spark Plugs Pack - BKR8EIX

Maximum performance and reliability!

NGK Iridium BKR8EIX
2 ° C colder than the OEM candle

Compatible with:
CA18DET, SR20DET, RB25DET, RB26DET, 1JZ, 2JZ, M20, M40, M42, M50, M52, Honda B16, B18C6, and Mazda NA and NB Engines (1.6L & 1.8L)

Made by NGK

K

69.99 *
available

Cometic Gasket Set - Nissan SR20DET Redtop (S13) Top End

Cometic makes it tight!

For Nissan S13 REDTOP (SR20DET) without valve cover gasket
Incl. Cylinder head gasket with 87,5mm bore
Stronger and better than the OEM variant

Cometic Ref: PRO2008T (ProStreet)

Made by Cometic

249.99 *
available

A'PEXI Power Intake Induction Kit

The A'PEXI Power Intake KIT!

Maximum filter, minimal restrictions
Plug and play for RB20DET and RB25DET
Inlet 75mm diameter
dry filter

Possibly. also suitable for CA18DET & SR20DET (if additional holes are drilled)

Made in Japan by A'PEXI

149.99 *
available

NGK Iridium Spark Plugs Pack - BKR9EIX

Maximum performance and reliability!

NGK Iridium BKR8EIX
3 ° C colder than the OEM candle

Compatible with:
CA18DET, SR20DET, RB25DET, RB26DET, 1JZ, 2JZ, M20, M40, M42, M50, M52, Honda B16, B18C6, and Mazda NA and NB Engines (1.6L & 1.8L)

Made by NGK

69.99 *
available

Origin Labo Headlights for Nissan Silvia PS13

Origin Labo Headlights PS13

Part type : headlights
To suit Nissan Silvia PS13
Material : fiber reinforced plastic (FRP)
Designed in Japan by Origin Labo
Quality finish with precise fitment
Sold as a pair (left + right), supplied with lights

299.99 *
available

RDNK LugNutz PURPLE - M12x1,25 (20 pieces)

RDNK LugNutz for your rims

20 LugNuts made of high-strength steel

Cone: 60 °
Shaft: 48mm
Thread: 12x1.25

including socket!

suitable for: Nissan, Subaru, & Suzuki

Made in the EU

69.99 *
available

HP Ignition Uprated Coilpacks for Nissan CA18DET (200SX S13)

High Performance Ignition!

Pack of 4 uprated coilpacks
To suit : Nissan 200SX S13
Engine code : CA18DET
Solve misfires and hesitant performance
High quality and reliability
Provide a power and torque gain up to 4%
Bolt-on fitment
Equivalent to OEM part number(s) : 22448-AA100, 22448-AA101

199.99 *
available

GReddy Platinum Pro JIS-P08 Spark Plug

Japanese Performance and Reliability !

Platinum spark plugs, made in Japan by GReddy & NGK

Two grade colder than standard
Compatible with : see list below
Ideal for sporty and tuned Japanese engines
Thread length : 19 mm
Total length : 72 mm (exc. electrode)
Thread : M14x1.25
Socket size : 16
GReddy part no. : 13000118

suitable for:

Toyota:
4A-GE, 4A-GZE (Corolla, MR-2 ...)

Nissan:
CA18DET (S13)
RB20DE, RB20DET (Skyline R32, Laurel ...)
RB26DETT (Skyline R32, R33, R34 GT-R)

Mazda:
B6-ZE, BP-ZE (MX-

29.99 *
available

Nissan S13 / 300ZX Z32 Clutch Slave Cylinder

Nissan S13 / 300ZX Z32 Clutch Slave Cylinder

Nissan 200SX S13 (88-94) CA18DET
Nissan 300ZX Z32 (90-97) VG30DETT

Replacement strongly recommended at the same time as the clutch

Made by NPS

59.99 *
available

4x114.3 track plates - Nissan (2 pieces)

Space your Wheelz!

high quality PCD track plates for your missile.

Selectable from 15mm - 40mm
66.1mm hub diameter
made of high quality 6082 aluminum (black)

100% fitting!

Made in the EU

69.99 *
available

EBC Brake Discs - Drilled and Grooved for Nissan 200SX S13 (front)

Efficient brake with EBC

2 EBC brake discs - slotted and perforated
Material of the highest quality and workmanship
suitable for: Nissan 200SX S13 (front)

Made by EBC

219.99 *
available

Redneck Garage - Schassi Shortshifter

Schassi shortshifter a lá redneck garage <3

Ready to install!

fits directly over the transmission tunnel
suitable for Nissan S13, S14 and S15

MADE IN THE EU!

69.99 *
available

Walbro Motorsport 255 L / h Fuel Pump Kit - Nissan 200SX S13, R32, Z32

The Walbro Motorsport Fuel Pump Kit!

Flow rate: 255 L / h
OEM part out, Walbro in.
Plug and Play

1 year warranty!

Made by Walbro

129.99 *
available

Nissan S14 / Datsun Clutch Slave Cylinder

Nissan S14 / Datsun 240Z, 260Z & 280Z Clutch Slave Cylinder

To suit Nissan 200SX S14 / S14A (93-99) & Datsun 240Z, 260Z, 280Z

Replacement strongly recommended at the same time as the clutch

Made by NPS

49.99 *
available

GReddy Iridium Tune JIS#8 Spark Plug

Japanese Performance and Reliability !

Iridium spark plugs, made in Japan by GReddy & NGK

Two grade colder than standard
Compatible with : see list below
Ideal for sporty and tuned Japanese engines
Thread length : 19 mm
Total length : 72 mm (exc. electrode)
Thread : M14x1.25
Socket size : 16
GReddy part no. : 13000068

suitable for:

Toyota:
4A-GE, 4A-GZE (Corolla, MR-2 ...)

Nissan:
CA18DET (S13)
RB20DE, RB20DET (Skyline R32, Laurel ...)
RB26DETT (Skyline R32, R33, R34 GT-R)

Mazda:
B6-ZE, BP-ZE (MX-

19.99 *
available

Brake line KIT - Nissan 200SX S13

High-quality brake line KIT for your missile

Brake pipes made of steel flex with Teflon sheathing
Washers and clips are included if necessary
Plug & Play - Old out New in

Made in the EU

119.99 *
available

GReddy Iridium Tune JIS#7 Spark Plug

Japanese Performance and Reliability !

Iridium spark plugs, made in Japan by GReddy & NGK

One grade colder than standard
Compatible with : see list below
Ideal for sporty and tuned Japanese engines
Thread length : 19 mm
Total length : 72 mm (exc. electrode)
Thread : M14x1.25
Socket size : 16
GReddy part no. : 13000067

suitable for:

Toyota:
4A-GE, 4A-GZE (Corolla, MR-2 ...)

Nissan:
CA18DET (S13)
RB20DE, RB20DET (Skyline R32, Laurel ...)
RB26DETT (Skyline R32, R33, R34 GT-R)

Mazda:
B6-ZE, BP-ZE (MX-

19.99 *
available

Mishimoto Radiator - Nissan S13 CA18DET

Cool down with Mishimoto!

Mishimoto radiator
fast installation plug & play
35% cooler than the rest on the market

suitable for Nissan S13 CA18DET

279.99 *
available

HKS Super Hybrid Air Filter for Nissan s13

More air for the lungs!

Plug and Play (100% exact fit)
Quick and Easy Install
Super hybrid technology

MADE in JAPAN by HKS

59.99 *
available

Aluminium Expansion Tank for Nissan 200SX S13, S14, S14A, Silvia S15

Aluminium Expansion Tank

for Nissan 200SX S13, S14, S14A, Silvia S15

99.99 *
available

EBC Brake Pads - for Nissan 200SX S13 (88-09 / 91) FRONT

EBC Performance coverings!

EBC pads for your brake system
Improved performance over OEM PAD

Selectable are:
Green Stuff (stable up to 450 ° C) Road Use
Red stuff (stable up to 750 ° C) Road Use
Yellow Stuff (stable up to 800 ° C) Road and Track Use
Blue Stuff (stable up to 900 ° C) Road and Track Use

Asbestos free!

Delivery package: 4 pieces

Made by EBC

 

119.99 *
available

Mishimoto Radiator - Nissan S13 SR20DET

Cool down with Mishimoto!

Mishimoto radiator
fast installation plug & play
35% cooler than the rest on the market

suitable for Nissan S13 SR20DET

299.99 *
available

Wiring Harness for the OEM Nissan Z32 air mass meter (the legend)

The right wiring harness for the Z32 air mass meter

Original Nissan part
Suitable for S13, S14, S14a, and S15
Tested with warranty

USED ​​PART!

29.99 *
available

Cometic cylinder head gasket for Nissan S13 CA18DET / CA18DE - 85mm Bore

BMW Cometic Reinforced Head Gasket

To suit Nissan S13 CA18DE/DET

Ideal for a repair / rebuild or an upgrade

Various thicknesses and diameters available 

Superior quality and resistance to OEM parts

109.99 *
sold out (on demand)

Origin Labo V2 Carbon Roof Spoiler for Nissan 200SX S13

Origin Labo Roof Spoiler S13

Part type : roof spoiler
To suit Nissan 200SX S13
Material : carbon fiber
Designed in Japan by Origin Labo

199.99 *
available

BC Racing RM-MA Coilovers for Nissan Silvia S15 (99-02)

BC Racing Inverted Coilovers RM-MA

High performances for competition use
Inverted design, reduces unsprung weight
For Nissan 200SX S15 (99-02)
Chassis code(s) : S15
Wide range of height adjustment
30 stage damping adjustment
Spring rates : 8 kgF/mm (front) & 6 kgF/mm (rear)
OEM specification brake hose fittings
Anti-corrosion coating and dust boots
1 year warranty
Sold as a set of 4

1,329.99 *
available (1-2 weeks)

ACL Race Main Bearing Set - Nissan CA18DET

ACL main bearing for your engine!

Resilient in the high speed range
Reduces friction and operating temperature
Increases lubrication and oil supply

ACL Reference: 5M1633H-STD
suitable for: CA18DET

149.99 *
available

Origin Labo V2 Carbon Roof Spoiler for Nissan 200SX PS13

Origin Labo Roof Spoiler PS13

Part type : roof spoiler
To suit Nissan Silvia PS13
Material : carbon fiber
Designed in Japan by Origin Labo

199.99 *
available

Billet Aluminium Half Moon Cam Bungs for RB & CA

CA & RB Half Moon Cam Bungs

Made from forged aluminium

Designed for RB20DE(T), RB25DE(T), RB26DETT, CA18DE(T) engines

Fits in place of existing rubber bungs

Perfect sealing and improved reliability !

Made by Redneck Garage

24.99 *
*
Prices incl. VAT, plus delivery
1 - 50 of 64 results